Manual Lavadora Techwood Tw1000



Loading...

I N S T R U C T I O N M A N U A L

M A N U E L D ' I N S T R U C T I O N

M A N U A L D E I N S T R U C C I O N E S

Impact Wrench

  • Lavadora de carga frontal,5 kg / 1.000 rpm,12 programas de lavado,carga automatica,clasificacion energetica: a / a,lavado en frio,exclusion del centrifugado,bloqueo infantil,indicadores luminosos de funciones,lavado rapido,boton start / pausa.
  • User Manual LAVADORA FAGOR ELEGANCE - This User Manual - also called owner's manual or operating instructions - contains all information for the user to make full use of the product. This manual includes a description of the functions and capabilities and presents instructions as step-by-step procedures.

Boulonneuse à chocs

Llave de impacto

Makita TW1000 Pdf User Manuals. View online or download Makita TW1000 Instruction Manual.

TW1000

006015

DOUBLE INSULATION DOUBLE ISOLATION

DOBLE AISLAMIENTO

WARNING:

For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

AVERTISSEMENT:

Pour votre propre sécurité, prière de lire attentivement avant l’utilisation. GARDER CES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.

ADVERTENCIA:

Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la herramienta. GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA.

ENGLISH

SPECIFICATIONS

Model

TW1000

Capacities

Bolt size

M24 - M30 (1” - 1-3/16”)

High tensile bolt

M22 - M24 (7/8” - 1”)

Square drive

25.4 mm (1”)

No load speed (RPM)

1,400/min.

Impacts per minute

1,500

Max. fastening torque

1000 N.m (738 ft.lbs)

Overall length

382 mm (15”)

Net weight

8.4 kg (18.5 lbs)

Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

Note: Specifications may differ from country to country.

GENERAL SAFETY RULES

USA002-2

(For All Tools)

WARNING:

Read and understand all instructions.

Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

grounded power cord and grounded power supply system.

5.Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

8.When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”.

These cords are rated for outdoor use and reduce the risk of electric shock.

Personal Safety

9.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

4.Double insulated tools are equipped with a 10. Dress properly. Do not wear loose clothing or

polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insula-

tion eliminates the need for the three wire

jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

11.Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

12.Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

13.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

14.Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Ordinary eye or sun glasses are NOT eye protection.

20.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

21.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

22.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

15.Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

16.Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

17.Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

18.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

19.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

23.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

24.When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of electric shock or injury.

USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

Table 1: Minimum gage for cord

Ampere Rating

Volts

Total length of cord in feet

120 V

25 ft.

50 ft.

100 ft.

150 ft.

More Than

Not More Than

AWG

0

6

18

16

16

14

6

10

18

16

14

12

10

12

16

16

14

12

12

16

14

12

Not Recommended

SPECIFIC SAFETY RULES

USB003-2

DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to impact wrench safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury.

1.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of tool “live” and shock the operator.

2.Wear ear protectors.

3.Check the socket carefully for wear, cracks or damage before installation.

4.Hold the tool firmly.

5.Always be sure you have a firm footing.

Be sure no one is below when using the tool in high locations.

6.The proper fastening torque may differ depending upon the kind or size of the bolt. Check the torque with a torque wrench.

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

SYMBOLS

USD202-2

Manual Lavadora Techwood Tw1000

The followings show the symbols used for tool.

V............................

volts

A ...........................

amperes

Hz..........................

hertz

..................

alternating current

no load speed

.......................

.......................

Class II Construction

.../min....................

revolutions or reciprocation per

minute

..................

number of blow

FUNCTIONAL DESCRIPTION

CAUTION:

Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.

Switch action

005970

1. Switch trigger

B

A

1

CAUTION:

Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released.

Change the direction of rotation only when the tool comes to a complete stop. Changing it before the tool stops may damage the tool.

The switch is reversible, providing either clockwise or counterclockwise rotation. To start the tool, simply pull the lower part (A) of the switch trigger for clockwise or the upper part (B) for counterclockwise. Release the switch trigger to stop.

ASSEMBLY

CAUTION:

Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.

Installing side grip (auxiliary handle)

005971

1. Side grip

2. Groove

1

Manual Lavadora Techwood Tw1000 Calidad

2

Fit the side grip into the groove on the hammer case and fasten securely.

The grooves for the side grip installation are located in two positions. Install it at the proper position according to your work.

Selecting correct socket

Always use the correct size socket for bolts and nuts. An incorrect size socket will result in inaccurate and inconsistent fastening torque and/or damage to the bolt or nut.

Installing or removing socket

CAUTION:

Always be sure that the tool is switched off and unplugged before installing or removing the socket.

For socket without O-ring and pin

005973

1. Socket

1

2. Anvil

2

To install the socket, push it onto the anvil of the tool until it locks into place.

To remove the socket, simply pull it off.

For socket with O-ring and pin

Tw1000

005972

2

1. O-ring

2. Pin

1

Move the O-ring out of the groove in the socket and remove the pin from the socket. Fit the socket onto the anvil of the tool so that the hole in the socket is aligned with the hole in the anvil. Insert the pin through the hole in the socket and anvil. Then return the O-ring to the original position in the socket groove to retain the pin. To remove the socket, follow the installation procedures in reverse.

OPERATION

The proper fastening torque may differ depending upon the kind or size of the bolt, the material of the workpiece to be fastened, etc. The relation between fastening torque and fastening time is shown in the figure.

005976

N m

High tensile bolt

(ft lbs)

1000

M24(1')

(740)

800

M24

(1')

torque

M22(7/8')

(590)

600

M22

Fastening(300)

(440)

(7/8')

400

200

(150)

01 2 3 4 5 Fastening time(S)

Hold the tool firmly and place the socket over the bolt or nut. Turn the tool on and fasten for the proper fastening time.

NOTE:

Hold the tool pointed straight at the bolt or nut.

Excessive fastening torque may damage the bolt/

nut or socket. Before starting your job, always

Manual Lavadora Techwood Tw1000 Tv

perform a test operation to determine the proper fastening time for your bolt or nut.

The fastening torque is affected by a wide variety of factors including the following. After fastening, always check the torque with a torque wrench.

1.Voltage

Voltage drop will cause a reduction in the fastening torque.

2.Socket

Manual Lavadora Techwood Tw1000 3

Failure to use the correct size socket will cause a reduction in the fastening torque.

Manual Lavadora Techwood Tw1000 Parts

A worn socket (wear on the hex end or square end) will cause a reduction in the fastening torque.

3.Bolt

Even though the torque coefficient and the class of bolt are the same, the proper fastening torque will differ according to the diameter of bolt.

Even though the diameters of bolts are the same, the proper fastening torque will differ according to the torque coefficient, the class of bolt and the bolt length.

4.The use of the universal joint or the extension bar somewhat reduces the fastening force of the impact wrench. Compensate by fastening for a longer period of time.

5.The manner of holding the tool or the material of driving position to be fastened will affect the torque.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.

Replacing carbon brushes

Manual Lavadora Techwood Tw1000 2

001145

1. Limit mark

1

Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time. Use only identical carbon brushes.

Remove the protector. Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps.

005974

1. Protector

1

005975

1. Brush holder cap

2. Screwdriver

1 2

To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.

ACCESSORIES

CAUTION:

These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.

If you need any assistance for more details regarding these accessories, ask your local Makita service center.

Extension bar

Side grip

Socket

Plastic carrying case

EN0006-1

MAKITA LIMITED ONE YEAR WARRANTY

Warranty Policy

Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge.

This Warranty does not apply where:

repairs have been made or attempted by others:

repairs are required because of normal wear and tear:

the tool has been abused, misused or improperly maintained:

alterations have been made to the tool.

IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM THE SALE OR USE OF THE PRODUCT. THIS DISCLAIMER APPLIES BOTH DURING AND AFTER THE TERM OF THIS WARRANTY.

MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF “MERCHANTABILITY” AND “FITNESS FOR A SPECIFIC PURPOSE,” AFTER THE ONE YEAR TERM OF THIS WARRANTY.

This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

IC 7200 Out of Stock Everywhere - Where to Backorder? Icom squeezes an extra hundred out of the people that. Im looking for a high serial number unit.

Our Services

The IMEI number or in other words International Mobile Equipment Identity is a unique 15-digit code that precisely identifies the device with the SIM card input. The first 14 digits are defined by GSM Association organization. The last digit is generated by an algorithm named Luhn formula and it has a control character. This number is an individual number assigned to each and every phone all over the world. The easiest way to IMEI check on any phone is to use the *#06# sequence.
The IMEI was created because the SIM card number cannot be a permanent identifier of the device. The SIM Card is associated with the user and can be easily transferred from the phone to another phone that’s why IMEI was developed.
Why would you need to check the IMEI Number? The number is useful when you would like to send the device for service to fill out warranty forms. Besides that, if you want to report a stolen or a lost phone at the police or network operator you should use the IMEI Number as well. After that you can block your phone and it will make the device unusable, regardless of whether the SIM card is changed or removed. What is also really important is that IMEI contains a few secret information about the product but also sometimes allows you to locate the smartphone.


How to use check IMEI function? How to extract secret information from IMEI Number? The imei.info is the best answer to this question. All you need is to use our IMEI checker function. By using our free lookup function we use the first six digits of IMEI called TAC (Type Approval Code) to find the exact model of the device. Afterwards when the search IMEI engine will find your phone the specification will be displayed on the screen. Here you can read the secret info about your device and the basic specification. One of the most important features of IMEI.info lookup function are the online checkers such as warranty info, simlock status, IMEI carrier check, blacklist report. On our site you can use all of this IMEI service checks and simple check IMEI feature completely free.

Transceiver

Model nameIC-7200/7600
Download Type USB Driver
VersionVer.1.00
Update2009/02/26
Note

This is the first release.

  • The driver supports the following radios (as of February 2009);
    The USB driver installation is required for each unit, because the serial number of each unit is registered to the PC.
    ・IC-PCR1500
    ・IC-PCR2500
    ・IC-7200
    ・IC-7600
  • Before starting the download, please read 'USB driver installation guide' thoroughly for the installation details and make sure what is required (system environment as well as items) for the installation.
File Type ZIP
File Size 619KB
ManualIC-7200/7600

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of the person making the download.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

I fully understand the above, and agree not to hold Icom Inc. responsible for any damage to my equipment operation or loss of data as a result of this download.


Previous